HMDeviceFirmware

R E L E A S E N O T E S

Device: HmIP-BSM Component: Application of the Homematic IP switch actuator with power metering for brand switch systems, flush mount

Company: eQ-3 Entwicklung GmbH, Maiburger Str. 36, 26789 Leer, Germany Author: M. Battermann

Version 1 (2 for pluggable).10.2 - 20171009

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B
• 1754501B
• 1854630A

** Bugfix

** Improvement

** Comments

• Increased version of HMOS to 1.20.4.

Version 1 (2 for pluggable).10.0 - 20171006

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B
• 1754501B
• 1854630A

** Bugfix

** Improvement

** Comments

• Created Tag 1(2 for pluggable).10.0

Version 1 (2 for pluggable).9.2 - 20171006

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B
• 1754501B
• 1854630A

** Bugfix

• Corrected behaviour of weekprogrammm for neagtive coordiantes. [HMIP_BSM-43][HMIP_FSM-14][HMIP_FSM16-10] [YOU_SWA_PAI-32][YOU_SWA_POM_PAI-46]
• Changed behaviour of init routines in powermeter- and switch-task. [HMIP_BSM-40]
• [GRASS] Fixed behaviour of sending statusmessages for multichannel devices.

** Improvement

** Comments

Version 1 (2 for pluggable).9.1 - 20170908

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B
• 1754501B
• 1854630A

** Bugfix

** Improvement

• new parameter for suppressing messages to Access Controller

** Comments

• First release version for HmIP-PCBS2

Version 1 (2 for pluggable).8.12 - 20170719

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B
• 1754501B

** Bugfix

• Statusmessage handling corrected

** Improvement

• Statusmessage handling optimized for multichannel devices
• No reboot after aborded factory reset
• new telegrams are only send if previous telegram is acked or timed out

** Comments

• First release version for HmIP-MOD-OC8
• Use of bootloader 1.10.0

Version 1 (2 for pluggable).7.6 - 20170530

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• [HMIP_PCBS_BAT-14] ARR timeout is not observed with the Info and TimeInformation frames
• [HMIP_PCBS_BAT-15] LowBat Bit is not set in the status Info

** Improvement

• [HMIP_PCBS_BAT-16] DataType Operating Voltage send with StatusInfo

** Comments *

Version 1 (2 for pluggable).7.5 - 20170519

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• [HMIP_PCBS_BAT-12] The device reacts with the same event counter for an unconditional switch command.
• [HMIP_PCBS_BAT-13] Device is permanently awake.

** Comments *

Version 1 (2 for pluggable).7.4 - 20170427

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• [HMIP_BSM-33] Fixed a bug with not acting device if the channel key was pressed at a included device.

** Comments *

Version 1 (2 for pluggable).7.3 - 20170426

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• [HOTFIX] Increased the power to trigger a simulated keypress from 0.1W to 1 W. [HMIP_BSM-32]
• [HOTFIX] Value for the new powerstatus is saved after being stable for two measurements. [HMIP_BSM-32]
• Corrected default duration of weekprogramm to 0xFF.
• Corrected / Optimised sending of a normal ACK/NACK. [CHANGEMANAGEMENT-25]

** Comments *

Version 1 (2 for pluggable).7.2 - 20170425

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

** Comments

• Removed ramp time from the weekprogram.
• Added sending of statusframes for the weekprogram. (After inclusion, cyclic and on request)
• Corrected a bug with inhibit channels. [CHANGEMANAGEMENT-51]

Version 1 (2 for pluggable).7.1 - 20170413

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

** Comments

• Added lock feature to weekprogramm channel.
• Added delayed weekprogram status info to status info receiver after change of lock channels.

Version 1 (2 for pluggable).7.0 - 20170405

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• Increased the pulse for switching the relais from 30 ms to 75 ms.

** Comments

• Increased version due to creation of a tag.

Version 1 (2 for pluggable).5.9 - 20170405

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix *

** Comments

• Added new weekprogramm.

Version 1 (2 for pluggable).5.8 - 20170328

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• In auto inclusion mode, the triple burst listener device is not a permanent listener.

** Comments *

Version 1 (2 for pluggable).5.7 - 20170308

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix

• Fixed a bug with the sequence counter in the unicast frame (for collecting ACKs) after sending multicast frames due to a long keypress.

** Comments *

Version 1 (2 for pluggable).5.0 - 20161209

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F
• 1764508B

** Bugfix *

** Comments

• Increased version number due to creation of a tag.

Version 1 (2 for pluggable).3.8 - 20161128

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• [GRASS] Corrected a bug with RSSI calculation in statusInfo.

** Comments *

Version 1 (2 for pluggable).3.7 - 20161114

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• [GRASS] Fixed a bug that caused errors with one partner linked to more channels.

** Comments *

Version 1 (2 for pluggable).3.6 - 20161104

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Fixed a bug with sending unrequested ACKs.

** Comments *

Version 1 (2 for pluggable).3.5 - 20161021

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• Added switching the relay as EMC action.

Version 1 (2 for pluggable).3.4 - 20160926

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Fixed a bug with the simulated keypress generated from the powermeter task.

** Comments *

Version 1 (2 for pluggable).3.3 - 20160913

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Added IDLE state to switch task.
• Corrected behaviour of the powerfailure function.
• Corrected behaviour of the overhead function.
• Suppressed sending of StatusInfoFrames if the device is not included.
• Corrected behaviour of factory reset if the keyVisual is pressed during powerUp.

** Comments *

Version 1 (2 for pluggable).3.2 - 20160901

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Included hmos 1.16.2 which fixed a bug with exlusion after inclusion

** Comments *

Version 1 (2 for pluggable).3.1 - 20160721

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Corrected size of action type.
• Fixed a bug that caused not spawning conditional switch channel task.
• Fixed setting of the decision value for falling direction in the conditional switch channel.

** Comments *

Version 1 (2 for pluggable).3.0 - 20160719

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• Increased version number due to creation of a tag.

Version 1 (2 for pluggable).1.17 - 20160718

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• StutusInfo frames from the switch module can now be send with ARR-Bit. StatusInfo frames from the powermeter are still unidirectional all the time.

** Comments *

Version 1 (2 for pluggable).1.16 - 20160714

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• Removed sending of config update requests on buttonpress of the keyvisual for all permanent powered actuators.

Version 1 (2 for pluggable).1.15 - 20160708

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• [HmIP-PSM]Fixed bug that first reset step is ready before the timeout of 4 seconds occur.
• Suppress boot blinking if reset is in progress.
• Fixed a bug with index of parameter arrays if the key visual is used as channel key.

** Comments *

Version 1 (2 for pluggable).1.14 - 20160704

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Conditional switch channel gets now removed in idle state.

** Comments

• Set the default values for event delay of output1, meter and conditional channel from 1 to 3 seconds.
• Powermeter arrays for averaging now always get resetted if SWITCH_set_level_real() is called.

Version 1 (2 for pluggable).1.13 - 20160616

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• [HmIP-PSM]Fixed a bug in evaluation of long keypresses for the pairing mode.
• [HmIP-PSM] Fixed a bug with setting parameters for the input channel.

** Comments

• [HmIP-PSM] Set default value for the longpress time in the HmIP-PSx devices to 4s.

Version 1 (2 for pluggable).1.12 - 20160613

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Corrected some typos.

** Comments

• Added conditional switch channel.

Version 1 (2 for pluggable).1.11 - 20160531

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Reset ACCEPT_ANY_DEVICE to 0.

** Comments

• [HmIP-PSM] Major version increased to 2. Minor and Path number will run parallel for all devices.

Version 1.1.10 - 20160518

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• [HmIP-PS] Added routines for HmIP-PS.
• Renamed CS5490_zc.c /.h to zerocrossing_interrupt.c / .h to be more general.
• Smaller changes to the DUMMY_SGTIN.
• Reduced number of partners for HmIP-PSx to 20. With this all switch actuators act the same.

Version 1.1.9 - 20160512

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• [HmIP-FSM16] Corrected a bug with the switching direction.

** Comments

• Added visualisation of the channelstate with the key visual (Including the parameter) to all actuators.

Version 1.1.8 - 20160510

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• [HmIP-PSM] Added pairing functionality.

Version 1.1.7 - 20160509

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• [HmIP-PSM] Added routing functionality.

Version 1.1.6 - 20160509

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix

• Some style changes.
• Corrected calculation of energycount.

** Comments

• Some optimisations on startup.

Version 1.1.5 - 20160503

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• Corrected some comments and function headers.
• Corrected parameter for energy threshold. It was one byte but has to be two byte.
• [HmIP-PSM] Added parameter LED_DISABLE in list1 of the real channel.

Version 1.1.4 - 20160502

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• [HmIP-PSM] Added default link between key visual and the switch channel.
• [HmIP-PSM] Added routines to do visialisation of the channel state with the key visual.
• [HmIP-PSM] Corrected factory reset gesture (only valid at power up).

Version 1.1.3 - 20160428

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B
• 1454104F

** Bugfix *

** Comments

• [HmIP-PSM] Added key routines for switching with the key visual.

Version 1.1.2 - 20160426

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed to which multicast addresses the device listens.

** Comments

• Startet porting code to the PSM hardware.

Version 1.1.1 - 20160425

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed a bug with ACKs to config update request frames.

** Comments *

Version 1.1.0 - 20160413

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix *

** Comments

• Increased version number due to creation of a tag.

Version 0.5.25 - 20160407

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed another bug with loading and accepting new parameter.

** Comments *

Version 0.5.24 - 20160407

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed a bug with eventdelay of the switch channels. (wrong channel "group" was read)
• Fixed a bug with reading out configuration parameters for the switch channel(s).

** Comments *

Version 0.5.23 - 20160405

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Added forgotten initialisation of of reset pin for FSM16.

** Comments

• Added / Corrected Power fail detection for bistable relais.

Version 0.5.22 - 20160401

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Redesign of sending ACKs.
• Added marker for rx options.

** Comments *

Version 0.5.21 - 20160331

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed a bug with keypress counter in simulated keypresses.
• fixed problem that the internal ACK frame is send to the address of the link partner, which has received while waiting for tx callback.
• fixed problem hat the rx is not restarted while waiting for tx callback
• Fixed a bug with sequence counter handling for statusinfo.

** Comments

• Exchanged KEY_1 and KEY_2 to uniform channel layout of HmIP priducts. Now Channel 2 is the upper button but upper butten holds its old function.

Version 0.5.20 - 20160330

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed a bug with checking the sender address (Mistake in version 0.5.17 checked not on receiving switch commands but in direct execution case)

** Comments *

Version 0.5.19 - 20160329

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix *

** Comments

• Added answering of time information frames.

Version 0.5.18 - 20160329

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix *

** Comments

• Changed behaviour of longkeypress in the internal link from toggle to the same behaviour as the short one.

Version 0.5.17 - 20160324

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed handling of seq-counter of different sender.
• Fixed executing of internal send commands.

** Comments

• Corrected some typos, comments and style.
• Removed unnecessary saving of sequence counter.
• Reverted change of powerUp-jumptarget enumeration.

Version 0.5.16 - 20160322

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed setting and sending of binary state from the real channel.
• Fixed powerup behaviour. NOTE: PowerUp action is triggert 2s after boot due to settle time of the measurement IC!
• Fixed some typos and style.

** Comments *

Version 0.5.15 - 20160304

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed a bug with receiving new configuration for the powermeter channel.

** Comments *

Version 0.5.14 - 20160303

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed a bug with numbering of parameters for powermeter channel.

** Comments *

Version 0.5.13 - 20160301

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Smaller cleanup and correction of typos.

** Comments

• Added channel information to the statusinfo frame.
• Actualisations of information in the LevelInfo frame

Version 0.5.12 - 20160224

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Fixed two small logic bugs in application.c.
• Fixed a bug with sending long keypresses.

** Comments

• Added support for bistable relays.

Version 0.5.11 - 20160218

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix

• Corrected a bug with long keypress.

** Comments

• Corrected number of possible partners for the powermeter channel.
• Removed the small delay that was inserted in version 0.5.10.

Version 0.5.10 - 20160210

** Related Hardware

• 1424102A + 1434181A
• 1564305B
• 1554267B

** Bugfix *

** Comments

• Added a small delay between receiving a "force statusinfo" telegramm trom testrunner and sending it because testrunner has a bug and/or is to slow to send the command and start the receive step.

Version 0.5.9 - 20160205

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Added "force statusinfo" to the testmode.
• Added saving of calibration gain values.

Version 0.5.8 - 20160203

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix

• Corrected teh handling of channel numbers with direct executions.
• Corrected some size conflicts NUMBER_OF_ACT_CHANNELS and NUMBER_OF_SWITCH_CHANNELS in combination with virtual channels.
• Fixed a bug in the order of calibration steps.

** Comments *

Version 0.5.7 - 20151218

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Moved handling of Request Time Service frame from testmode to application receive callback.
• Added handling of timeinfo request frames.

Version 0.5.6 - 20151217

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix

• Added MAX_PARTNERS_CHANNEL_POWERMETER to the maximal number of partner.
• Fixed some minor bugs in getter functions for the device flags of LIST0

** Comments

• Implemented requesting and receiving time information.
• Implemented sending of own time information.
• Implemented handling of new LIST0 parameters.
• Implemented handling of new LIST12 parameters.

Version 0.5.5 - 20151210

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Added files an functions for the weekprogramm (first time compiling, not ready implemented).

Version 0.5.4 - 20151127

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Implemented virtual Channels also to PowerUpAction.

Version 0.5.3 - 20151126

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix

• Corrected size of persist data in the linker options.
• Corrected some comments.

** Comments

• Implemented virtual channels.

Version 0.5.2 - 20151120

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Corrected handling of sequence counter.

Version 0.5.1 - 20151113

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Corrected some default values for the parameter.

Version 0.5.0 - 20151111

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix *

** Comments

• Increased the version number due to creation of a tag.
• Added sending of NAK_INVALID_CHANNEL.

Version 0.3.14 - 20151109

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix

• Fixed a small bug in the powerUp action.
• Corrected type of second parameter ("permanent") of PROFILE_timercalc-function (uint8_t -> bool_t).

** Comments

• Resorted the order of writing the CS5490 registers on calibration.

Version 0.3.13 - 20151105

** Related Hardware

• 1424102A + 1434181A
• 1564305A
• 1554267B

** Bugfix

• Added m_useTmp to the switch module to be able to do correct configuration.
• Corrected a bug in the factory reset routines regarding the key number.

** Comments

• Added parameter CURRENTDETECTION_BEHAVIOR.
• Added case SERVICE_ID_FORCE_STATUSTEL in preparation for the calibration by the testtool.
• Added calibration routines.
• Removed obsolete application_dummy files.
• Removed some obsolete pin definitions because these were unified across BSM and FSM.

Version 0.3.12 - 20151028

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added routines to save and read out the release delay time.

Version 0.3.11 - 20151028

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added routines for measuring the delay times of the relay.
• Added routines to save and read out the operate delay time.

Version 0.3.10 - 20151023

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added testroutines for LEDs and KEYs.

Version 0.3.9 - 20151023

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Fixed a bug with sending error frames.
• Removed division by two at the calculation of the switching times because the worst possible switch time of the relais is longer as half a period and would cause negative switching times.

** Comments

• Removed unnecessary parameter for zc-delay.
• Removed some warnings.
• Small change with sending NACKs.
• Added a trigger for sending an ACK after direct executon frame with FRAMES_SNC_ACTION_CODE_RAMP_START was received.
• Instead of three groups of one-dimensional arrays for power-up action now one groups of two-dimensional arrays is used.

Version 0.3.8 - 20151019

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Fixed a bug in the key routines regarding inclusion requests and simultan switch commands.
• Corrected location of GDO2 (transceiver IO) in the hardware config.

** Comments

• Added Task for internal temperatur measurement.
• Added sending of error frames.
• Moved or deleted some functions from application_dummy.c
• Corrected default relay delays for better accuracy.
• Did some code clean-up and corrections of comments.

Version 0.3.7 - 20151009

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Added initial configuration of the relay pin in the switch module.

** Comments

• Added zero-crossing-switching (functionality without HMOS -> directly with the emlib).
• Changed the return values of APPLICATION_KEY_key_evaluation to a bitarray to be able to handle a switch command of a not included device and sending out inclusion requests.

Version 0.3.6 - 20150930

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Small change if the reset procedure gets aborted with a short keypress.

** Comments

• Implemented report link partner problem.

Version 0.3.5 - 20150929

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Switched read out of FUP and DRDY flags to be able to read the frequency with faster data interval.
• Corrected ome wrong coments.

** Comments

• Changed the reset procedure to fit for mains powered devices. -> added Error state and removed state for inital keypress.

Version 0.3.4 - 20150928

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added sending of StatusInfo frames after entering a new profile section.
• Now the powermeter and the switch module can cancel a pending statusinfo from the other module if the own (delay) timeout is reached.

Version 0.3.3 - 20150924

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Added sending of a StatusInfo telegramm after inclusion.

** Comments

• Added sending of StatusInfo frames in the powermeter task.
• Added sending of Powermeter-values in the statusinfo.
• Added LevelInfo as ACK (Just a dummy, channel is still wrong).
• Did some optimisations with sending frames in the application module.
• Commented sending of ACKs in the switch module (this seems to be done in the profile module already).
• Commented sending of StatusInfos in the switch module (this seems to be done in the profile module already).

Version 0.3.2 - 20150915

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Changed sample number from 500 to 400.
• Corrected the device type.

** Comments

• Now the value of m_pavg (the last measured power value) is taken to sense the network status. This can be done because the value does not to be very accurate (average).

Version 0.3.1 - 20150911

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Changed the function header of SWITCH_get_state

** Comments

• Implemented functionality that the powermeter channel simulates a keypress on button one or two to trigger the profile if someone presses another switch in the bridge network.
• Implemented features to just switch the relay on if the chennel is off and vise versa.
• Implemented further init step of the CS5490 to change the sample count (not the sample rate!).

Version 0.3.0 - 20150904

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Removed some parts to added some HmIP-FSM functionality.

Version 0.1.10 - 20150903

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Did some code cleanup and commentation.
• Added powerstatus mechanism that changes DO of CS5490 and stores the value to a module variable.

Version 0.1.9 - 20150706

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added files for powermeter functionality.

Version 0.1.8 - 20150702

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added delays to the tasks if they try to call the parameter module and get a BUSY.

Version 0.1.7 - 20150630

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Correted some behavior with sending and receiving ACKs.
• Corrected default behaviour of long keypress.

** Comments *

Version 0.1.6 - 20150626

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Simplified parameter lists.

** Comments

• Removed some of my own warnings.
• Removed triggering of "NACK peer unknown" because this is handled in the STACK / HMOS.
• Further process in multi channel functionality.
• Added functionality to send NACKs and statusinfo frames with set ACK bit.

Version 0.1.5 - 20150624

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix

• Fixed some parameter issues.

** Comments *

Version 0.1.4 - 20150623

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Added switch module.
• First steps of multi channel functionality added.

Version 0.1.3 - 20150618

** Related Hardware

• 1424102A + 1434181A
• 1564305A

** Bugfix *

** Comments

• Further implementing of the profile task.
• Made some changes to the creation of the internal link.
• Added dummy-functionality as output.

Version 0.1.2 - 20150617

** Related Hardware

• 1424102A + 1434181A

** Bugfix *

** Comments

• Implemented creation of internal link.
• Added profile task. (not tested yet!)
• Added application_dummy for missiong (SWITCH-) functions to make the profile task compile.

Version 0.1.1 - 20150615

** Related Hardware

• 1424102A + 1434181A

** Bugfix *

** Comments

• Changes in the LED callbacks due to changes in HMOS.
• Renaming of the functions in the application key module.

Version 0.1.0 - 20150611

** Related Hardware

• 1424102A + 1434181A

** Bugfix

• Corrected DEVICE_INFO_OPERATION_MODES.

** Comments

• Added Button-task.
• Added creating and handling of config request frames.
• Added creating and sending of unconditional switch command frames.
• Added define for relay port / pin.

Version 0.0.1 - 20150605

** Related Hardware

• 1424102A + 1434181A

** Bugfix *

** Comments

• Initial commit with template as new start of the project.

--- END OF FILE ---

Version -

** Bugfix

• <JIRA Vorgangsnummer (optional)> -
• <JIRA Vorgangsnummer (optional)> -

** New Feature

• <JIRA Vorgangsnummer (optional)> -
• <JIRA Vorgangsnummer (optional)> -

** Modification

• <JIRA Vorgangsnummer (optional)> -
• <JIRA Vorgangsnummer (optional)> -

** Improvement

• <JIRA Vorgangsnummer (optional)> -
• <JIRA Vorgangsnummer (optional)> -

** Bugs

• <JIRA Vorgangsnummer (optional)> -
• <JIRA Vorgangsnummer (optional)> -

** Related Hardware

• - <zusätzliche Hinweise, Modifikationen usw.>

** Comments