HMDeviceFirmware

C H A N G E L O G

Please note: Only use the firmware file in connection with the current software-version of the CCUx!

Device: HmIP-MIOB - Homematic IP Multi I/O-Box

Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany

Version 2.0.010 - 2022-05-23

** Bugfix

• Status info cannot request from virtuel channels
• No CSC Frame to linkpartner from ch 9/10 at changeover input
• Sorting of status info container wrong

Version 2.0.008 - 2022-05-10

** Bugfix

• Direct Execution Command to FAL is not assembled correctly when inputs are configured as "Normally Open".

Version 2.0.006 - 2022-04-27

** Bugfix

• Due to the default settings of the link parameters, a conditional switch command is not handled according to specification

Version 2.0.004 - 2022-03-31

** Bugfix

• Weekprogram-Status(-with Ack) is not triggered in case of Mode-Change
• MIOB "Normally Closed"-Input: Cooling is not activated

Version 2.0.000 - 2022-02-07

** Bugfix

• Direct link CO input to FALx deactivates internal channel A
• MIOB sends many status messages during inclusion process
• If the switch-on and switch-off times in the Easy Profile are set to "Not active" at the same time, the device hangs up.
• Rocker switch no longer responds after frequent operation
• CCU2 MIOB LED confirms red if internal button has been linked to more than 2 other actuators
• MIOB fails sporadically and can only be operated again after the 230 volt supply has been interrupted

** New Feature

• Use of the HmIP-MIOB in connection with the HmIP-BWTH wall thermostat

** Improvement

• The time information telegram does not contain a note about the sommer / winter time change.
• If possible, send multicasts only to PARTNER_ALL_WIRED_DEVICES instead of to PARTNER_ALL_DEVICES.
• Improve switch command functionality by new implementation of local loopback, adding command cancelation and using node sending functionality

Version 1.8.004 - 2019-01-29

** Bugfix * Level Command at analog output fixed * Behaviour of event counter fixed

** Improvement * Split up event counter for digital input channels in case of conditional switch command

** Modification * Change to Version 1.8.004.

Version 1.8.002 - 2019-01-24

** Bugfix * Long keypress behaviour at digital input channels corrected (last long keypress is sent with arr) * Fixed wrong behaviour of application sequence counter

** Improvement * Sending of config request frames in case of no linkpartner at digital input channels

** Modification * Change to Version 1.8.002.

Version 1.8.000 - 2018-12-19

** Bugfix * Weekprogram under certain circumstances does switch all actuator channels if switched all at the same time

** Improvement * Weekprogram implemented * Pairing with FALMOT * All PowerUp parameters, that are listed in list 3 of the device, must be supported. * Disable MSG to AC parameter implemented * Application Sequence Counter handling adapted * Configuration parameter for pushbutton channel (long presstime, double presstime, repeated long press timeout) added

** Modification * Change to Version 1.8.000.

Version 1.6.004 - 2017-11-23

** Improvement * MIOB behaviour in case of system restart improved. Now sends DEC-Logic to FAL in any case.

** Modification * Change to Version 1.6.004.

Version 1.6.002 - 2017-02-09

** Bugfix * In case of multiple FAL, linked to different acutator channels of the MIOB, in some configurations not all FALs got DEC Logic command (eg. for changeover).

** Modification * Change to Version 1.6.002.

Version 1.6.001 - 2017-02-08

** Bugfix * Fixed Issue: Direct execution command was sent to FAL on wrong Channel. If no Link between Out0 and FAL created, no DEC was sent from MIOB

** Modification * Change to Version 1.6.001.

Version 1.6.000 - 2017-01-30

** Bugfix * Error in heat demand function (VIRT B-Channels of both actuators) fixed.

** Modification * Change to Version 1.6.000.

Version 1.4.000 - 2016-09-20

** Bugfix * Issue with global pump protection function (in conjunction with the FAL) fixed.

** Modification * Change to Version 1.4.000.

Version 1.2.000 - 2016-09-08

** Bugfix

* Fixed issue with powerup ontime and powerup ondelay at actuator channels.
* Fixed issue with event delaytime and event randomtime for statusinfo 
  transmission in case of statuschange at actuator channels.
* Fixed issue with log keypress timer at application startup.

** Modification * Change to Version 1.2.000.

Version 1.0.012 - 2016-08-25

** Bugfix

* Bugfix at internal link between input and output channels (CO-Pilot).

** Modification * Change to Version 1.0.012.

Version 1.0.011 - 2016-07-28

** Bugfix * Double ack at csc and usc fixed. * Application sequence counter error fixed.

** Modification * Change to Version 1.0.011. * Changed Lib to 1.16.1

Version 1.0.010 - 2016-07-28

** Bugfix * Bug with DEC of second relay output fixed

** Modification * Change to Version 1.0.010. * Unconditional switch command added for switching actuator channels

Version 1.0.009 - 2016-07-27

** Bugfix

* Application ACK is now sent in case of set ARR Bit.  
* Logic Combination fixed.
* Powerupactions fixed.
* Edit Parameterlist fixed.

** Modification * Change to Version 1.0.009. * Send Statusinfo subsequent to levelcommand or dec with level on channel for analog output. * Statusinfo is only sent in case of "significant" changes.

Version 1.0.008 - 2016-06-21

** Modification * Change to Version 1.0.008. * Minor changes in pairing routines. * Device Functions IDs adapted.

Version 1.0.007 - 2016-06-15

** Bugfix * Bugfix in SNC Command

** Modification * Change to Version 1.0.007. * Internal Links implemented (eg. Link between C/O input and CO-Pilot Output). * Tactile Switch functionality implemented for digital Inputs (sends Unconditional Switch Command with short (<400 ms) or long (>400 ms every 250 ms) keypress). * Statusinfo implemented.

Version 1.0.006 - 2016-06-01

** Bugfix * Bugfix in pairing routines.

** Modification * Change to Version 1.0.006. * Heatdemand relay functions on Virt B channels implemented. * DEC send to FAL if FAL reset has been detected (sequence counter = 0x01).

Version 1.0.005 - earlier - 2016-05-23

** Bugfix * Bugfix in pairing routines.

--- END OF FILE ---