HMDeviceFirmware

C H A N G E L O G

Please note: Only use the firmware file in connection with the current software-version of the CCUx!

Device: HmIP-HAP - Access Point 2, anthracite

Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany

Version 1.0.36 - 2025-07-11

** Bugfix

• The HAP2 sends ICMP destination unreachable with the wrong IP source address.
• The HAP2 does not send its cyclic status info frames.
• First signal of the boot sequence is not visible

Version 1.0.34 - 2025-07-10

** Bugfix

• The access point determines routes from radio frames that are not directly addressed to it.
• HAP2 blinkt nach Neustart der HCU
• Keine Verbindung zu den Geräten, wenn HAP2 die Verbindung übernimmt
• Wrong entry in Routing Table
• HAP2 bursted Tripple Burst Empfänger nicht an
• No answer for frame from sim device send to crrfd

Version 1.0.32 - 2025-07-07

** Bugfix

• Heating Controller Mode Frames to Multicast are not filtered. 
• The AccessPoint does not respond to the cloud address if it is not directly connected.

Version 1.0.30 - 2025-07-03

** Bugfix

• All routes learned over backbone send in rm response
• Age counter not reset after icmp neighbor advertisement
• No answer to Status Request frames
• RSSI with 0x80 for rf device entry
• Network table entry with distance 0

Version 1.0.28 - 2025-06-20

** Bugfix

• Remove parameter 202 in list 27 channel 0
• Self RM Response is not send over websocket
• Error answer at get routing info
• Route inclusion frames to websocket not correct
• Answer invalid input for some frames over hap v4

Version 1.0.26 - 2025-06-13

** Bugfix

• Connecting to websocket when accessprio is set to 0xff
• Websocket connection is not closed when include as secondary ap
• Error at set/read highest parameter value at list 27

** Improvement

• Insecure cipher suites have been removed for TLS handshake.

Version 1.0.24 - 2025-06-04

** Bugfix

• HmIP frames over websocket to long
• Routes learned over backbone are not distributed over RF
• No status info after reboot
• Long button press data wrong

** New Feature

• Distribute background OTAU at 13 second intervals.

Version 1.0.22 - 2025-05-26

** Bugfix

• When updating from version 1.0.18 to 1.0.20, the parameters are not reset correctly.
• Sporadically, the access point does not send Ethernet frames after startup

Version 1.0.20 - 2025-05-14

** Bugfix

• The HAP2 does not flood the frame if the destination is not reachable.
• The crRFD address is marked as unreachable in the routing table, even if the access point is connected to the cloud server.
• MAC Sequencenumer is overwritten by HmIP-Parameter
• HAP2 exchange - devices not reachable
• StatusInfo is send to MulticastAllAccessControllers

** Improvement

• Sending ICMP-Neighbor-Solicitation after startup to all devices with triple burst.

Version 1.0.16 - 2025-05-08

** Bugfix

• The Netfinder module must first receive a Netfinder frame before it can send a frame.
• Error at appseqno overflow

Version 1.0.14 - 2025-05-05

** Bugfix

• The access point does not attempt to establish a connection if the primary access point is no longer available.
• CrRFD Address is not set as additional listener after reinclusion
• Backbone Sequence counter is not loaded correctly after reinclusion

Version 1.0.12 - 2025-04-29

** Bugfix

• Networkkey and Backbonekey are not set correctly with the command "set enc nwk" and "set enc bbk"
• Boot bit is always set in StatusInfo
• No answer for get device inclusion data local and master key

Version 1.0.8 - 2025-04-16

** Bugfix

• Keys are not reloaded after setting encrypted network or backbone key
• Listener mode is not correctly taken into account when sending via radio

** New Feature

• Send Report Available Version telegramm to crRFD

Version 1.0.6 - 2025-04-09

** Bugfix

• A lookup URL configured via Netfinder is deleted after a firmware update.
• Remove whitespaces from attribute keys when submitting config data
• No download from hawkbit preprod hap2

** Improvement

• Hostname in DHCP discover einbauen
• Cloudverbindung wärend der Produktion
• Die normalen LED-Signale können den Produktionstest stören 

** Modification

• Activate certificate verification for Lookup and Cloud.

Version 1.0.4 - 2025-04-08

** Bugfix

• String terminator is not set correct for Cloud URL
• HTTPS download does not work
• HmIP Frames over websocket are routed and send by 0x000000
• Device sends RM Response if other device sends RM Response
• Device sends RM V1 over RF
• Device sends firmware update unsolicited
• Request configuration not work
• Factory reset over websocket with answer error
• Answer for rm request wrong
• Distance in RM Response table entry always 0
• No RM Request after activate routing
• ICMP neighbor/router_advertisement is send after factory rest / exclusion

** Modification

• Fallback update URL zum release korrigieren

Version 1.0.2 - 2025-03-31

** Improvement

• Activate watchdog

Version 1.0.0 - 2025-03-28

** Bugfix

• hap2 not route backbone frames to crrfd
• Download of Update file does not work with S3 Server when gatewaytoken is sent

Version 0.3.26 - 2025-03-24

** Bugfix

• Unencrypted frames are routed in inclusion mode
• ListenerMode in InclusionRequest wrong
• Factory reset button press time wrong

Version 0.3.22 - 2025-03-07

** Bugfix

• first status frame is send with key_state = short press
• LED Statusanzeige nicht richtig
• No rm table entry for rf device sends config request or icmp neighbor advertisement
• AccessPrio 0xff dont close the websocket connection
• Reconnect time is not used in CloseConnection frame
• New address after restart in inclusion mode
• Factory reset timeout to short

Version 0.3.20 - 2025-02-27

** Bugfix

• Incorrect websocket ping

** New Feature

• Hawkbit connects to default server if no URL is set

** Improvement

• LWIP aktualisieren

Version 0.3.18 - 2025-02-25

** Bugfix

• HAP2 firmware hangs after update to version 0.3.16

Version 0.3.16 - 2025-02-24

** Bugfix

• The HAP2 application hangs if the cloud server unexpectedly closes the connection

** New Feature

• Hawkbit supports SGTIN as URL for local update

Version 0.3.14 - 2025-02-17

** Bugfix

• For TLS connections with the ECDHE-RSA-AES256-GCM-SHA384 cipher suite, decryption errors occur if the key length is greater than 2048 bits.
• Hawkbit answer now contains manufacturer code and device type

** New Feature

• Flashing seconed Ethernet LED on traffic

** Improvement

• Hawkbit now adds deviceindividual data to the URI by itself

Version 0.3.10 - 2025-02-11

** New Feature

• Hwakbit-Client implementation

** Improvement

• Use ssl for lookup request

--- END OF FILE ---