C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-BSL - Homematic IP Switch Actuator with Signal Lamp â for brand switches
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 2.0.2 - 2023-09-29
** Bugfix
- Changelog only entry for Version 2.0.0
- LinkProfile optical signal and optical signal off special values wrong
- LinkProfil with OnOffLevel old value and dont care wrong
- OnMinLevel at RealChannels not used with DEC
- Only status info at error overtemp
- DEC with duration ontime 0s is set as infinity
- OpticalSignal in Linkparameter is used one time when OnOffTime is set
- LED sequence 'Unused Button' is not used
- No status info after OutputBehaviour use last selection which was != 0x00
- Level is set from 0% to 5% if dec 0x8d with only enum is send
- OutputBehaviour is always set to 0 if level is set to 0%
- Level old value is not used at DEC 0x8d
- PowerUpOpticalSignal is not used
- Weekprogram with level on to old value not set the old value
- At powerup jumptarget OffDelay output not switch on
Version 2.0.0 - 2023-08-01
** Bugfix
- Wrong evaluation of the event counter with multiple links between sensor and actuator
- In a switching group, only the first channels are switched on
- System led shows also actions on channel 7 & 11 instead of only channel 3
- If the switch-on and switch-off times in the Easy Profile are set to "Not active" at the same time, the device hangs up.
- HmIP-BSL: Rocker switch no longer responds after frequent operation
- System LED signals error (red) if rocker switch is linked to internal channel and 2 or more external channels
- race condition may cause deadlock
- False handling with two internal direct links
- False function of ToggleDimLastDir in combination with ToggleDimToCounter
- Reserved bit is set in StatusInfo Level Group
- Output colour white when creating link partner
** New Feature
- Switch-off ramp via central programs or automation.
** Improvement
- Long button press cannot dim in conjunction with a motion detector.
- Extension of LED modes analog to HmIPW-WRC6
- New profile parameter SHORT_OFF_OUTPUT_BEHAVIOUR for selecting an additional LED colour/behaviour
- The time information telegram does not contain a note about the sommer / winter time change.
- HmIP actuators with default links as button pair, should also have ABORT_EVENT_SENDING_CHANNELS as default in pairs.
- Changing driving directions with HmIP UP actuators via parameters.
- Modify event counter check to meet current specification
- Improve switch command functionality by new implementation of local loopback, adding command cancelation and using node sending functionality
Version 1.0.2 - 2018-08-30
** New Feature
--- END OF FILE ---