HMDeviceFirmware

C H A N G E L O G

Please note: Only use the firmware file in connection with the current software-version of the CCUx!

Device: HmIP-BDT - Homematic IP Dimmer mit Phasenabschnittsteuerung fÃ¼r Markenschalterserien

Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany

** Bugfix

** Bugfix

The ON_MIN_LEVEL parameter is evaluated inconsistently for a DEC and a direct link.

** New Feature

Add separate LED mode with additional configuration parameters for a better dimming behaviour

** Bugfix

Wrong evaluation of the event counter with multiple links between sensor and actuator
In a switching group, only the first channels are switched on
With the settings "Anzahl der auszulassenden Statusmeldungen = 0" and "Anzahl der auszulassenden,unverÃ¤nderten Statusmeldungen = 0" the status is not transmitted in 2 to 3 minute intervals
Device sends answers-frame on a TimeInfo from AC to "any-router"-address
If the switch-on and switch-off times in the Easy Profile are set to "Not active" at the same time, the device hangs up.
Rocker switch no longer responds after frequent operation
System LED signals error (red) if rocker switch is linked to internal channel and 2 or more external channels
Homematic IP actuators trigger, due to the astro function, one hour delayed or prematurely on the day of the time changeover.
A TimeInfo frame with ARR-Bit will not be answered
Wrong behaviour if a link partner is answering late
Device does a reboot if factory reset is aborted
device uses OFF_LEVEL of a direct link for direct execution command if level of direct execution is 0
Wrong order of datatypes in the statusinfo frame
The Weekprogram astro times doesn't work correctly with negative latitude or longitude
After an OTAU reboot the inclusion requests are send to address 0x000000 sometimes

** New Feature

** Improvement

Switch from external to internal oscillator
The time information telegram does not contain a note about the sommer / winter time change.
HmIP actuators with default links as button pair, should also have ABORT_EVENT_SENDING_CHANNELS as default in pairs.
If possible, send multicasts only to PARTNER_ALL_WIRED_DEVICES instead of to PARTNER_ALL_DEVICES.
Changing driving directions with HmIP UP actuators via parameters.
Modify event counter check to meet current specification
Improve switch command functionality by new implementation of local loopback, adding command cancelation and using node sending functionality
All PowerUp parameters, that are listed in list 3 of the device, must be supported.
Changed default values for Powerup action parameters

** Bugfix

Homematic IP actuators trigger, due to the astro function, one hour delayed or prematurely on the day of the time changeover.
A TimeInfo frame with ARR-Bit will not be answered
Device does a reboot if factory reset is aborted
device uses OFF_LEVEL of a direct link for direct execution command if level of direct execution is 0
Wrong order of datatypes in the statusinfo frame
The Weekprogram astro times doesn't work correctly with negative latitude or longitude
After an OTAU reboot the inclusion requests are send to address 0x000000 sometimes

** New Feature

** Improvement

All PowerUp parameters, that are listed in list 3 of the device, must be supported.
Changed default values for Powerup action parameters

** Bugfix

Implement missing support of the direct execution commands LOCK and UNLOCK
After the first time NACK answer, all answers are NACK
Device hangs up while installing update V1.2.2
Wrong applications sequence number after a long keypress
If not included, a long keypress triggers an inclusion request all 250 ms
Direct execution commands with speciale value level "old value" is not handled correctly
Device sends answers on multicast commandand on commands without arr bit in generally
If a sending device (RC etc. ) is connected to more than one virtual channel, only the first channel is switching.
Modify power up jump targets to match the power up jump targets of the switch actuators
Na answer on a configuration commit frame

--- END OF FILE ---